Installation

StoryWalls

StoryWall Installation Instructions

Is hanging the StoryWall difficult?
No. Installation is similar to hanging a large picture. We assemble most of the StoryWall components at our factory including the hanging cleat which is securely attached to the back of your StoryWall. (See below)

How should I handle the StoryWall?
To eliminate fingerprints we suggest that you wear cloth gloves. This is a particularly good idea if your StoryWall is printed first surface.

How do I install my StoryWall?
1. Install the wall cleat. It’s important to make sure the cleat is level. We provide drywall screws that should be drilled into the drywall.
2. Lift the first panel above the wall cleat.
3. Lower the panel onto the wall cleat.
4. Position the second panel. All done.

How high should I hang my StoryWall?
A good rule of thumb is that the midpoint of the panel should be between 57” and 60” from the floor. In rooms with ceilings greater than eight feet, the StoryWall can be hung a little higher.

Can you install my StoryWall?
Yes, probably. We have a network of highly qualified installers located throughout the United States. Contact us to get more information.

Dimensional Letters

Stencil Guide

How do I install my dimensional letters?
1. Remove the enclosed stencil guide which shows perfect letter spacing.
2. Tape the stencil to the wall (We suggest using painter’s tape).
3. Check that the letters are level and positioned correctly, usually centered above your StoryWall.
4. Apply the letters which have a strong adhesive back for easy application. Finally, remove the stencil. You’re all done.